The PM18 is a pneumatic bench top injection molding machine was designed for product development, model making and prototype molding work but it is also used for short run production molding. Supplied with an in/out shuttle this press is ideal for insert molding on electrical components and cord sets and a variety of other applications.

Injection Capacity (maximum)

• ¾" diameter plunger
• Shot size - 1.3 oz.
• Injection pressure - 9600 psi
• 21/32" diameter plunger
• Shot size - 1.0 oz.
• Injection pressure - 12,550 psi
• Barrel Heat - 1,750 watts

• Clamp force - 18 tons at 150 psi
• Clamp stroke - 0.210"
• Maximum mold size - 8" x 8" x 4.75" high
• Bottom eject stroke - 1"

• Footprint - 2' w x 3'd
• Height - 45"
• Weight - 450 lbs.
• Electrical service - 120 volt/15 amp