Specifications:
 
Clamping force
Platen area (in. x in.)
Shot size (standard)
       other sizes available
Screw diameter (inches)
L/D ratio
Injection pressure (lbs./sq. in)
Injection screw rate (CIPS)
Injection stroke (inches)
Clamp stroke, Fully adjustable
Injection speed, adjustable (in/sec)
Screw speed, adjustable (RPM)
Hydraulic screw motor HP @ 1,000 PSI
Hydraulics (reservoir size/pump size)
Maximum operating pressure
Motor

VS50/60
50, 60 tons
18 x 18
4 ounces
 
1 ¼
16:1
0-20,000
4.50
5
12" max.
4.75
0-270
4 HP
40 gals/22 gpm
2800 PSI
20 HP

VS70/75
70, 75 tons
18 x 24
6 ounces
 
1 5/16
16:1
0-20,000
7.75
7
12" max.
4.75
0-270
4 HP
60 gals/22 gpm
2800 PSI
25 HP

• Direct acting clamp
• Adjustable clamp pressure
• Proportioning barrel temperature control
• Timers with selectable ranges
• Injection speed control
• General purpose nozzle
• Adjustable daylight
• 135M Nitrided feed screw with general purpose tip
  and anti-back flow check
• Adjustable back pressure
• Injection pressure adjustable

• Injection screw RPM adjustment
• Two hand mold close
• Screw decompression (suck back)

• Custom shot size
• Bottom eject
• Thermoset injection unit
• 3 zone temperature control for barrel
• Shut off nozzle
• Shuttle table: 8" x 10" mold base;
  10" x 14" mold base
  Rotaries: 2 or 4 station; 36" or 48" dia.