| Back |
MODEL VS30/40
VERTICAL OR HORIZONTAL
INJECTION INSERT
MOLDING MACHINE
Specifications:
Clamping force
Platen area (in. x in.)
Shot size (standard)
other sizes available
Screw diameter (inches)
L/D ratio
Injection pressure (lbs./sq. in)
Injection screw rate (CIPS)
Injection stroke (inches)
Clamp stroke, Fully adjustable
Injection speed, adjustable (in/sec)
Screw speed, adjustable (RPM)
Hydraulic screw motor HP @ 1,000 PSI
Hydraulics (reservoir size/pump size)
Maximum operating pressure
Motor
Weight, approx
|
VS30
30 tons
12 x 12
4 ounces
1 ¼
16:1
0-15,000
4.50
5
12" max.
4.75
0-270
2.5 HP
20 gals/6 gpm
2800 PSI
10 HP
3,500 lbs.
|
VS40
40 tons
12 x 16
6 ounces
1 5/16
16:1
0-20,000
6.75
7
12" max.
4.75
0-270
2.5 HP
20 gals/6 gpm
2800 PSI
20 HP
4,000 lbs.
|
|
![[MODEL VS30/40]](../images/gluco_vs30-40.jpg)
|
|
Standard Equipment:
- Direct acting clamp
- Adjustable clamp pressure
- Proportioning barrel temperature control
- Timers with selectable ranges
- Injection speed control
- General purpose nozzle
- Adjustable daylight
- 135M Nitrided feed screw with general purpose tip
and anti-back flow check
- Adjustable back pressure
- Injection pressure adjustable
|
- Injection screw RPM adjustment
- Two hand mold close
- Screw decompression (suck back)
Optional Equipment
- Custom shot size
- Bottom eject
- Thermoset injection unit
- 3 zone temperature control for barrel
- Shut off nozzle
- Shuttle table: 8" x 10" mold base;
10" x 14" mold base
Rotaries: 2 or 4 station; 36" or 48" dia.
|
|
|
|
|
|
