The VS10/20 Model is a vertical clamp injection molding machine. This fully hydraulic press is equipped with a reciprocating screw designed to maximize the accuracy of your shot size.

This "C" frame style press offers unobstructed access to tooling for ease of insert placement and part removal.

The VS10/20 is especially well suited for handling cord sets, hose assemblies and other types of long hard to handle inserts.

Also available with a left/right shuttle table.

Specifications:


Clamp force
Platen area (in x in)
Shot size (standard)
       other sizes available
Screw diameter
L/D ratio
Injection pressure (lbs/sq. in.)
Injection screw rate (CIPS)
Injection stroke (inches)
Clamp stroke, fully adjustable
Injection speed, adjustable (in/sec)
Screw speed, adjustable (RPM)
Hydraulic screw motor HP @
1,000 PSI
Hydraulics (reservoir size/
pump size)
Maximum operating pressure
Motor

VS10
 
10 tons
12 x 12
2 ounces
 
1
16:1
0-20,000
4.50
4
12" max.
4.75
0-270
 
2.5 HP
 
20 gals/8 gpm
2800 PSI
7.5 HP

VS20
 
15, 20 tons
12 x 12
4 ounces
 
1.25
16:1
0-15,000
6.75
6
12" max.
4.75
0-270
 
2.5 HP
 
20 gals/8 gpm
2800 PSI
7.5 HP

• Direct acting clamp
• Adjustable clamp pressure
• 135M Nitrided feed screw with general purpose tip
  and anti-back flow check
• Proportioning barrel temperature control
• Adjustable back pressure
• Timers with selectable ranges
• Injection pressure adjustable
• Injection speed control
• Injection screw RPM adjustment

• General purpose nozzle
• Two hand mold close
• Screw decompression (suck back)

• 3 zone temperature control for barrel
• Bottom eject
• Shut off nozzle
• Themoset Injection unit
• Shuttle table: 8" x 10" mold base;
  10" x 14" mold base
  Rotaries: 2 or 4 staiton; 36" or 48" dia.