| Back |
|
MODEL HVS/5R
The GLUCO model HVS/5R is a high performance rubber injection molding machine,
designed for optimum versatility. The machine is designed with a "C" frame type
clamp section for unobstructed loading of inserts or extrusions and ease of removing
molded parts.
The strip fed rubber injection unit is easily convertible from vertical to
horizontal, to service both sprue and/or parting line type tooling.
The HVS/5R is available with a dedicated power system for single machine
installations, or can be purchased with a centralized power system for powering multiple
machine installations.
|
![[MODEL HVS/5R]](../images/gluco_hvs5r.jpg)
|
Specifications:
Clamp
Type
Clamp force (tons)
Stroke (in)
Open daylight maximum (in)
Closed daylight minimum (in)
Maximum mold size (in)
Injection Unit
Type
Screw diameter (in)
Injection stroke (in)
L/D
Injection pressure maximum (psi)
@ 1,200
@ 1,500
Shot size (cu. in.)
(ounces)
Screw RPM
Hydraulics
Power supply for 6 machines:
Reservoir size (gal)
Pump (gpm)
Motor (hp)
Motor voltage
Power supply for single machine:
Reservoir size (gal)
Pump (gpm)
Motor (hp)
Motor voltage
General
Floor space (in) less power supply
Vertical injection
Horizontal injection
Height max. (in)
Vertical injection
Horizontal injection
Shipping weight (less power unit)
Dedicated single power unit
Shipping weight
Six position power unit
Shipping weight
|
Direct Acting Hydraulic
5 @ 1,200 psi
6.2 @ 1,500 psi
12
17.75
5.75
8" x 8"
Strip fed rubber,
reciprocating screw,
convertible horizontal/vertical
¾" or 1"
4"
16:1 12:1
12,800 7,200
16,000 9,000
1.8 3.1
1.1 2.0
0-200
45
18
15
230 or 460 V/ 3 phase
20
6
5
230 or 460 V/ 3 phase
L/R F/B
21 46
21 62
102 ½"
59 ½"
1,100 lbs.
33" x 26 ¾" x 24"
150 lbs.
54 ¼" x 35" x 33"
400 lbs.
|
|
|
|
|
|
